Adjusting Camera Settings and Using the Roller Controls

The aircraft camera has full control over key shooting settings, all of these settings can be found in the camera settings page in the Smart Co-Pilot System. Select the icon indicated in the diagram below to configure settings for the camera. Standard settings are similar to those found in most digital camera systems, including ISO, shutter speed, EV, quality, format etc.

ADJUST CAMERA SETTINGS WITH ROLLER CONTROLS

1. With no camera adjustment selected, press and hold on the B2 button for 2 secs (located on the top right). Release when one of the settings turns blue.

2. Roll the roller on the right (near the B2 button) to move through the different settings

3. Press the B2 button again to enter the setting, roll the roller to adjust 

4. Once you have set your setting, press the B1 button (located on the left side) to exit the expanded menu

5. Press again to close/exit the entire camera settings menu

• Related Articles

• Using the Creative Assistant

  CREATIVE ASSISTANT  The Creative Assistant feature offers an on-screen template to easily optimize scene composition.Visual templates include circle, diagonal, grid, golden ratio, quadrant, simple division, thirds, triangle and vanishing. To enable ...

• Camera LED Indicator

  The camera system has an LED indicator located beside the camera lens mount. This indicator displays the camera’s status.

• Attaching and Detaching the Camera Lens

  To ensure proper installation and removal of the camera lens, please follow the diagram below. ATTACHING THE CAMERA LENS   To attach the lens, align the red mark on the back of the lens with the red mark on the camera mount Once align, screw the lens ...

• Ground Station - Customized Controls

  ​

• EVOLVE 2 - Adjusting Bitrate

  In this video, Levi explains Bitrate and how to select the right Bitrate speed on the EVOLVE 2. ​