Beginner Mode and Multiple Flight Modes
BEGINNER MODE
Users may enable or disable the Beginner Mode under the following path: DRONE SETTINGS > AIRCRAFT > BEGINNER
MODE. When enabled, the aircraft will take off within a 98 ft radius from the home point. The flight speed will also be
reduced.
FLIGHT MODE
The EVOLVE 2 aircraft has 3 flight modes that the operator can choose from. The modes are selected by a 3-position
switch located on the top left of the Ground Station. Turn on the Multiple Flight Modes setting under the following path:
DRONE SETTINGS > AIRCRAFT > MULTIPLE FLIGHT MODES.
Related Articles
EVOLVE 2 - Flight Modes
In this video, Migz explains EVOLVE 2's different flight modes.
Aircraft Flight Control
The flight control of the EVOLVE 2 is accomplished by manipulating the control sticks on the Ground Station. Proper orientation must always be considered when flying the aircraft. A basic rule of thumb when remote piloting an aircraft is to realize ...
Flight Records
FLIGHT RECORDS The Ground Station seamlessly records your flight data and allows you to replay the aircraft's flight path, altitudes, and timing as well as any footage that was recorded during that flight. To access your Flight Records, please use ...
Flight System Limitations
Below are the flight limitations of the EVOLVE 2: SPEED • Ascending: 16.4ft/s (5m/s) • Descending: 6.6ft/s (2m/s) • Horizontal: 57 mph (92 km/h) (For higher top speeds contact customer support for signing of warranty wavier prior to activation) ...
EVOLVE 2 - Pre-Flight Checklist
In this video, Levi explains how to use the Pre-Flight checklist.