Camera LED Indicator

The camera system has an LED indicator located beside the camera lens mount. This indicator displays the camera’s status.

• Related Articles

• Ground Station LED Indicator

  The Ground Station LED indicator is located below the bottom screen. The LED indicates the current state of the Ground Station battery. When charging, the Ground Station LED will blink Red, until the battery is fully charged. Once charged, the LED ...

• Aircraft LED Indications

  The aircraft LED indicators are located under each motor and at the rear of the aircraft. The LED indicates the current state of the aircraft. See diagrams below for indications. INITIALIZING / WAITING FOR RC SIGNAL (Front: Red, Rear : Red / Green / ...

• Attaching and Detaching the Camera Lens

  To ensure proper installation and removal of the camera lens, please follow the diagram below. ATTACHING THE CAMERA LENS   To attach the lens, align the red mark on the back of the lens with the red mark on the camera mount Once align, screw the lens ...

• Adjusting Camera Settings and Using the Roller Controls

  The aircraft camera has full control over key shooting settings, all of these settings can be found in the camera settings page in the Smart Co-Pilot System. Select the icon indicated in the diagram below to configure settings for the camera. ...

• Aircraft Battery LED Indications

  When determining the estimated flight time and distance range of any aircraft flight, the user should have an idea of how much flight time is remaining according to the current power percentage left. Below describes the estimated flight times for ...