Charging the Intelligent Flight Battery

Charging the Intelligent Flight Battery



COMPONENTS OF THE BATTERY CHARGER
1. AC Power Cord/Cable
2. Adaptor
3. Charger Splitter Block
4. Aircraft Battery Connector
5. Ground Station Battery Connector

CHARGING THE AIRCRAFT BATTERY
1. Connect the charger to a power source.
2. Connect the battery to the charger’s Aircraft Battery Connector.
3. The battery is fully charged when all of the Battery LEDs indicators turn off.


    • Related Articles

    • Inserting, Removing, and Powering on the Evolve 2 Intelligent Flight Battery

      INSERTING THE AIRCRAFT BATTERY Be sure that the aircraft battery is fully charged before flying STEPS FOR AIRCRAFT BATTERY INSTALLATION 1.Ensure the battery is turned OFF . 2. Then ensure the orientation of the battery is correct (The OLED display ...

    • Charging the Ground Station Battery

      CHARGING THE GROUND STATION BATTERY The Ground Station battery can be charged with the supplied battery charger whilst inserted into the Ground Station‘s main housing.  CHARGING THE GROUND STATION BATTERY 1. Connect the charger to a power source.  2. ...

    • Aircraft Battery LED Indications

      When determining the estimated flight time and distance range of any aircraft flight, the user should have an idea of how much flight time is remaining according to the current power percentage left. Below describes the estimated flight times for ...

    • Flight Records

      FLIGHT RECORDS The Ground Station seamlessly records your flight data and allows you to replay the aircraft's flight path, altitudes, and timing as well as any footage that was recorded during that flight. To access your Flight Records, please use ...

    • Inserting and Removing the Ground Station Battery

      INSERTING THE GROUND STATION BATTERY STEPS FOR INSERTING THE GROUND STATION BATTERY 1. First ensure the battery is powered off. 2. Slide the latch to the right and insert the battery into the Ground Station. 3. Release the latch when the battery is ...