Ensuring Correct Propeller Alignment and Attaching and Detaching the Propellers

The propellers need to be mounted with the correct CW (clockwise) and CCW (counter-clockwise) configurations. Two propellers are marked with white rings and two propellers have no markings. Mount the propellers with the white rings to the motors with a white ring on top. Please follow the steps on the following page to ensure all propellers are securely in place.

SEE DIAGRAM FOR ATTACHING AND DETACHING THE PROPELLERS

• Ensure that both CW props with white circle markings match motors with white circle markings.

• Ensure that both CCW props with no circle markings match motors with no circle markings.

• Place the propeller on the motor with the red dot in-line with the white lock, apply a downward force, then twist in the direction of the arrow until the red dot is lined up with the red lock. Release and the propeller should spring up slightly and lock in place.

ATTACHING AND DETACHING THE PROPELLERS The EVOLVE 2 aircraft employs a sturdily constructed attach and detach propeller system. With a quick half turn installation, the aircraft can be ready to fly within minutes of pulling it out of the pack. To detach the propellers, follow the steps below in reverse. Before installing the props, please make sure that the pre-flight check list is complete.

SEE DIAGRAM FOR ATTACHING AND DETACHING THE PROPELLERS

• Related Articles

• Ensuring Correct Propeller Alignment and Attaching and Detaching the Propellers

  The propellers need to be mounted with the correct CW (clockwise) and CCW (counter-clockwise) configurations. Two propellers are marked with white rings and two propellers have no markings. Mount the propellers with the white rings to the motors with ...

• Attaching and Detaching the Camera Lens

  To ensure proper installation and removal of the camera lens, please follow the diagram below. ATTACHING THE CAMERA LENS   To attach the lens, align the red mark on the back of the lens with the red mark on the camera mount Once align, screw the lens ...

• Attaching and Detaching the Camera Gimbal

  Locate the red mark on the gimbal and align it to the unlock icon on the attachment mount. Then screw the gimbal CCW. Release the gimbal release button when the red mark aligns with the lock icon on the attachment mount. You should also hear a click ...

• EVOLVE 2 - User Manual

  You can download our user manual here. Feel free to drop us a comment or a message if you're missing some i

• Arming the Aircraft

  ARMING THE AIRCRAFT ARMING PRE-CHECK The EVOLVE 2 makes several internal calibrations and adjustments before each flight. If for any reason, any of the vital sensors or internal equipment has a safety issue, the aircraft will not ARM upon the ARM ...