Ground Station LED Indicator

The Ground Station LED indicator is located below the bottom screen. The LED indicates the current state of the Ground Station battery. When charging, the Ground Station LED will blink Red, until the battery is fully charged. Once charged, the LED will stop blinking. During normal operation, the LED will be displayed in constant blue. When the Ground Station battery level has dropped to a point requiring an immediate recharge, the LED will turn to Red. It is not recommended to start a new flight with an amber indication on the LED.

• Related Articles

• Camera LED Indicator

  The camera system has an LED indicator located beside the camera lens mount. This indicator displays the camera’s status.

• Ground Station Button Customization

  The Ground Station has 6 customizable buttons allowing our users to personalize control of the camera and gimbal. You can customize the buttons under the following path: DRONE SETTINGS > GROUND STATION > BUTTON CUSTOMIZATION

• Charging the Ground Station Battery

  CHARGING THE GROUND STATION BATTERY The Ground Station battery can be charged with the supplied battery charger whilst inserted into the Ground Station‘s main housing.  CHARGING THE GROUND STATION BATTERY 1. Connect the charger to a power source.  2. ...

• Turing On/Off the Ground Station

  When powering on the Ground Station, be sure to provide at least 3 to 6 ft (1 to 2m) of space between the Ground Station and the aircraft. (If the Ground Station and aircraft are too close together the system may not properly connect.) Short press ...

• Inserting and Removing the Ground Station Battery

  INSERTING THE GROUND STATION BATTERY STEPS FOR INSERTING THE GROUND STATION BATTERY 1. First ensure the battery is powered off. 2. Slide the latch to the right and insert the battery into the Ground Station. 3. Release the latch when the battery is ...