How to Perform an Auto Gimbal Calibration
AUTO GIMBAL CALIBRATION AND CENTRALIZE GIMBAL
If you have noticed that the gimbal is not centered, you can run the Auto Gimbal Calibration under the following path: DRONE SETTINGS > GIMBAL > AUTO GIMBAL CALIBRATION
Auto Gimbal Calibration will be disabled after takeoff. If you have noticed the gimbal is not centered during the flight, you can either press the C1 button (bottom left side of the ground station) OR DRONE SETTINGS > GIMBAL > CENTRALIZE GIMBAL OR land the aircraft and run the Auto Gimbal Calibration
You can also manually adjust the gimbal’s center point by using the following path: DRONE SETTINGS > GIMBAL > GIMBAL ADJUSTMENT
Related Articles
Compass and Accelerometer Calibration
COMPASS CALIBRATION The electronic compass on the EVOLVE 2 aircraft is used to determine the direction which aircraft is pointingto in reference to true north. The compass is a sensitive sensor that is affected by electromagnetic interference from ...
Attaching and Detaching the Camera Gimbal
Locate the red mark on the gimbal and align it to the unlock icon on the attachment mount. Then screw the gimbal CCW. Release the gimbal release button when the red mark aligns with the lock icon on the attachment mount. You should also hear a click ...
Preflight Checklist
The checklist below is recommended before every aircraft flight. Aircraft operators are encouraged to add more items that might be required for particular operations. 1. AIRCRAFT • Firmware (Up to Date) • Flight Mode (ALTITUDE (A) / POSITION (P) / ...
EVOLVE 2 - User Manual
You can download our user manual here. Feel free to drop us a comment or a message if you're missing some i
Ground Station Button Customization
The Ground Station has 6 customizable buttons allowing our users to personalize control of the camera and gimbal. You can customize the buttons under the following path: DRONE SETTINGS > GROUND STATION > BUTTON CUSTOMIZATION