Inserting and Removing the Ground Station Battery
INSERTING THE GROUND STATION BATTERY
STEPS FOR INSERTING THE GROUND STATION BATTERY
1. First ensure the battery is powered off.
2. Slide the latch to the right and insert the battery into the Ground Station.
3. Release the latch when the battery is securely inserted.
REMOVING THE GROUND STATION BATTERY
STEPS FOR REMOVING THE GROUND STATION BATTERY
1. First ensure the battery is powered off.
2. Slide the latch to the right to disengage the lock.
3. Remove by firmly gripping and pulling the battery from the Ground Station.
Related Articles
Charging the Ground Station Battery
CHARGING THE GROUND STATION BATTERY The Ground Station battery can be charged with the supplied battery charger whilst inserted into the Ground Station‘s main housing. CHARGING THE GROUND STATION BATTERY 1. Connect the charger to a power source. 2. ...Inserting, Removing, and Powering on the Evolve 2 Intelligent Flight Battery
INSERTING THE AIRCRAFT BATTERY Be sure that the aircraft battery is fully charged before flying STEPS FOR AIRCRAFT BATTERY INSTALLATION 1.Ensure the battery is turned OFF . 2. Then ensure the orientation of the battery is correct (The OLED display ...Ground Station LED Indicator
The Ground Station LED indicator is located below the bottom screen. The LED indicates the current state of the Ground Station battery. When charging, the Ground Station LED will blink Red, until the battery is fully charged. Once charged, the LED ...Turing On/Off the Ground Station
When powering on the Ground Station, be sure to provide at least 3 to 6 ft (1 to 2m) of space between the Ground Station and the aircraft. (If the Ground Station and aircraft are too close together the system may not properly connect.) Short press ...Ground Station Button Customization
The Ground Station has 6 customizable buttons allowing our users to personalize control of the camera and gimbal. You can customize the buttons under the following path: DRONE SETTINGS > GROUND STATION > BUTTON CUSTOMIZATION