Linking the Ground Station to an EVOLVE 2 Aircraft
The EVOLVE 2 aircraft system is pre linked from the factory.
If there‘s a situation which requires the Ground Station and the aircraft to be re-linked, or to pair the Ground Station to a new aircraft, please follow the steps below:
- Navigate to the Smart Pilot System aircraft Pairing Page. (Settings > Ground Station > Pairing)
- Turn on the aircraft.
- Keep the aircraft at least 3ft away from the Ground Station.
- Tap “Start Pairing” on the Ground Station screen.
- Follow the instructions on screen to complete the pairing.
- The screen shows the modules pairing status.
- The whole pairing process may take up to 1 minute.
Related Articles
Pairing the Ground Station and Aircraft
The EVOLVE 2 aircraft and its Ground Station should be paired out of the box per factory settings. In the event you need to repair the aircraft and the Ground Station, please follow the steps below: PAIRING PROCEDURES 1. Navigate to the Pairing Page ...
Charging the Ground Station Battery
CHARGING THE GROUND STATION BATTERY The Ground Station battery can be charged with the supplied battery charger whilst inserted into the Ground Station‘s main housing. CHARGING THE GROUND STATION BATTERY 1. Connect the charger to a power source. 2. ...
Turing On/Off the Ground Station
When powering on the Ground Station, be sure to provide at least 3 to 6 ft (1 to 2m) of space between the Ground Station and the aircraft. (If the Ground Station and aircraft are too close together the system may not properly connect.) Short press ...
EVOLVE 2 - User Manual
You can download our user manual here. Feel free to drop us a comment or a message if you're missing some i
Aircraft Flight Control
The flight control of the EVOLVE 2 is accomplished by manipulating the control sticks on the Ground Station. Proper orientation must always be considered when flying the aircraft. A basic rule of thumb when remote piloting an aircraft is to realize ...