Turing On/Off the Ground Station

Turing On/Off the Ground Station

When powering on the Ground Station, be sure to provide at least 3 to 6 ft (1 to 2m) of space between the Ground Station and the aircraft. (If the Ground Station and aircraft are too close together the system may not properly connect.) Short press and long-press the power switch until the Ground Station screens turn on (this double press procedure prevents accidental power-ups). While the Ground Station is initializing, power on the aircraft battery, it is important to power on the Ground Station first and the aircraft second, in that specific order, to achieve a proper RC connection.



    • Related Articles

    • Ground Station Button Customization

      The Ground Station has 6 customizable buttons allowing our users to personalize control of the camera and gimbal. You can customize the buttons under the following path: DRONE SETTINGS > GROUND STATION > BUTTON CUSTOMIZATION
    • Ground Station LED Indicator

      The Ground Station LED indicator is located below the bottom screen. The LED indicates the current state of the Ground Station battery. When charging, the Ground Station LED will blink Red, until the battery is fully charged. Once charged, the LED ...
    • Charging the Ground Station Battery

      CHARGING THE GROUND STATION BATTERY The Ground Station battery can be charged with the supplied battery charger whilst inserted into the Ground Station‘s main housing.  CHARGING THE GROUND STATION BATTERY 1. Connect the charger to a power source.  2. ...
    • Inserting and Removing the Ground Station Battery

      INSERTING THE GROUND STATION BATTERY STEPS FOR INSERTING THE GROUND STATION BATTERY 1. First ensure the battery is powered off. 2. Slide the latch to the right and insert the battery into the Ground Station. 3. Release the latch when the battery is ...
    • Pairing the Ground Station and Aircraft

      The EVOLVE 2 aircraft and its Ground Station should be paired out of the box per factory settings. In the event you need to repair the aircraft and the Ground Station, please follow the steps below: PAIRING PROCEDURES 1. Navigate to the Pairing Page ...